So I just found out that the ST wheels is behaving weirdly.
In this photo below, the regular wheel is at the rear most while all 4 ST wheels are at the front, and the build is facing to the right.
Why does the front most axial turn normally, but the secondary ST axial turn the other way? Shouldn’t both wheels turn the same direction?
This kind of bugs only existed if I put regular wheels in front of all ST wheels, and both bugs should not even exist: if they want to make the wheels turn less, just, make it turn less? instead of making them turn in a completely nonsense way???
2 Likes
maybe the middle wheel is too far back.
you should run non steering wheels in the middle.
but ya,that is kinda wonky…
here’s mine with 6 st wheels…
i put 2 non steering in the back and it still works right…
try taking the back non steering wheels off then put them back on,maybe it will reset them…i think the middle tire is too far back though …good luck.
I still keep banana builds with bigfoot and prefer that tonnage from non-ST bigfoot. you know, due to that stupid subdivision of tonnage height of wheels just because some leviathans mixed wheels.
They used to turn in the same direction before this latest season and only do that wacky turn when non-ST is the most frontal axial.
Foward, past center chassis,
and the st’s will perform as you desire, but a ideal turn won’t be achieved because of the 2 front sets of st’s and the rear nst positions are Not compatible
Non st shood be centered or near as practical, not forward of centre chassis, when there is st’s front and back
,position is paramount to optimize turn radius
Yw
Happy grinDing
